Motul brake fluid RBF 700 Factory Line DOT 4
Motul Brake Fluid RBF Factory Line DOT 4 is a fully synthetic brake fluid based on polyglycol especially for racing.
Suitable for all brake systems (steel, ceramic or carbon brake discs) currently used in racing.
Can also be used in conventional brake and hydraulic clutch systems.
Exceeds conventional brake fluids to polyglycol (DOT 3, DOT 4, DOT 5.1).
Specifications/Releases:
Specifications SAE J 1703, ISO 4925, FMVSS 116 DOT 4
Releases: FMVSS 116 DOT 4 ; SAE J1703
Advantages:
- Mixable with all polyglycol-based brake fluids DOT 3, DOT 4 and DOT 5.1, but not recommended,
- Extremely high dry boiling point of 336°C compared to other products based on silicone or polyglycol allows safe braking even under the most extreme operating conditions
- Very high wet boiling point of 205°C compared to other products based on silicone or polyglycol allows safe braking even in high humidity or rainy conditions.
- Under racing operating conditions, brakes are subject to very high thermal stress, therefore Motul RBF 700 should be tested at least after every 2nd race and replaced if necessary.
- Brake fluid absorbs moisture from the ambient air. This reduces the boiling point. For this reason Motul RBF 700 should only be stored under constant climatic conditions, carefully sealed in its original container.
Warning:
Not mixable with silicone based brake fluids (DOT 5) and special fluids such as LHM. Liquid may corrode vehicle paintwork.
