Shiftholder Aprilia V4 with integrated sprocket cover

Mounting instructions Shiftholder SCPAP001B03 with pinion cover

1. mark shift knob position on shift shaft

2. remove shift knob screw M6 (Allen)

3. remove shift knob from toothed shaft

4. remove pinion cover plastic 3 x M6 wrench size 8mm

5. disassemble holder for fuel tank ventilation hoses

6. from model 2016 with lower chain slider remove the screw from lower chain slider wrench size 13mm

Fix all cables so that they are not damaged by the shiftholder. 8.

Slide the shiftholder onto the shifting shaft and tighten it evenly with the screws supplied (8 Nm).

9. check cable routing of all cables

10. mount hoses tank ventilation with a cable strap on the cooling water hose.

11. attention on models without lower chain slider, the supplied sleeve must be mounted as a spacer at the bottom right.

12. mount aluminum sprocket cover on shiftholder

13. place shifting knob on the previously marked position and tighten the allen screw with 10 Nm.

14. function test of the gearshift for smooth running. 15.

15. finished, now you have earned a bottle of beer :-)